Advanced Gantry robot for fluid dispensing applications

The ADOfil Gantry dispensing robotic system, which offers superior operating performance and durability for a wide range of Automatic Adhesive dispensing system Machine is best in class automated application for Low medium and high volume production and dispensing application system. Machine Volumetric shot size control with speed control for precise dispensing application as per pattern desired on the gluing substrate
GRD 300 suits with different adhesive applications such as single component syringe, dual component syringe, single part cartridge, dual cartridge, single component valve and dual component valve application with suitable mountings as per end user application
The machine has vivid application even with special mountings with heating arrangement for hot melt application and spraying application for adhesive spreading application on substrate.

Brochure Send Enquiry

Features

3 Axis Linear movement guided gantry machine
System supported programming system.
Dispensing area supports dispensing of adhesive start to end point as specified in specs sheet.

Applications

Automation Industry, Material Handling, PCB Board Assembly, Packaging, Spraying Application etc.

Specification

Maximum Speed	X & Y : 200 mm/sec Z : 150 mm/sec
Tool Load	5 kg (11 lb.)
Repeatability	+/- 0.01 mm
Motion Control	Continuous path and Point To Point path
Programming Mode	G-Code
SD Card Support	Yes
Can Be Used To Dispense	Single and Two-Part MMAs, Single and Two-Part Epoxies, Single and Two-Part Acrylics, Single and Two-Part Polyurethanes, Single and Two-Part Silicones sealants
Dispensing attached	With suitable mountings
Dispensing port	Shell Aviator type 3 pin
Programming connection with Laptop/System	USB B type
Cycle feature	Available
Display	Graphical display
Power Supply	230 Vac, 5 Amp, 50 Hz
Internal Working Voltage	5 V and 12 V
Dimensions	300 x 300