The DV01 Series dispense valve systems accurately control the application of most low to medium viscosity fluids. This is a pneumatic valve with a fast stroke and shut off making with the ability to fine tune shot sizes. The compact design makes it easy to integrate into automated applications while the seal-less valve design creates a barrier great for moisture sensitive materials.The Diaphragm Valve DV01 configuration was designed to work well with a range of specialty chemicals including such as anaerobic adhesives (thread locker and coaxial blockers), cyanoacrylate glues and other aggressive fluids. Great for spin coating applications.
- Anaerobic thread lockers onto screw heads.
- Cyanoacrylates for sealing and bonding.
- Applying UV cure adhesives and lacquers.
Cyanoacrylate glues, Aggressive fluids, Anaerobic glues
| Type | Cyanoacrylate Glue Dispensing Gun |
| Pneumatic connector | 1/8 BSP to 6mm push fitting |
| Max Air input | 4-7 bar |
| Maximum Fluid Pressure | 5 bar |
| Type of air connection | 2 way air connection |
| Viscosity of material | 1-20,000 cps |
| Valve body Material | Aluminum |
| Valve Material region | Nylon - Delrin |
| Flow rate | 20 cc – 50cc per minute |
| Material in Connectors | 1/8BSP to 6mm tube |
| Dimension | D30mm*L90mm |
| Weight (Gram) | 180 |
| Dispensing adjustment | Stroke adjustable Dial |
| Dispensing port | Luer lock |
| Needle/Tip fitting Option | Yes |
.webp)
.jpg)
Write To Us
Learn more about Adofil products and services by sending us queries on a specific application. Contact Adofil by filling out the form below.