The suction-type dispensing valve adopts the upward movement to keep the glue structure, so that the rubber is stopped at the same time, and the residual glue on the remaining needle is reduced. The valve body is anodized by aluminum alloy, the sealing material adopts the latest tetra fluoro ethane material, and the contact colloid part is corrosion-resistant material. It can be equipped with a variety of different specifications of the static mixing tube, for AB Two-component glue. It is an effective and economical solution for dispensing any viscosity materials such as Polyurethane, Epoxy, Silicone, Methacrylate and Grease. Suitable for pump system/air pressure system.
Widely used in electronic products, mobile phone buttons, LED lamps, LCD, electrical switches, household appliances, battery packaging, keyboard and mouse, transformers, golf balls, coils, cameras, motors, medical equipment, watches, headphones, speakers and other applications.
| Structure Type | Dual Suck Back |
| Control Type | Double Acting |
| Flow Adjustment | Available |
| Operating Air Source | 0.4-0.7Mpa(1.0Mpa=10kgf/cm2=145psi=10bar) |
| Min. Shot Volume | 0.01ml |
| Operation Viscosity | 1-1,50,000cps |
| Body Material | Ss 304 Stainless Steel |
| Material Input Pressure | <1.0Mpa(1.0Mpa=10kgf/cm2=145psi=10bar) |
| Material Inlet Outlet Size | Female1/4"NPT |
| Operating Cycle | <600/min |
| Overall Dimensions(mm) | D30mm*L90mm |
| Weight (Gram) | 360 |
.webp)
.jpg)
Write To Us
Learn more about Adofil products and services by sending us queries on a specific application. Contact Adofil by filling out the form below.