• info@adofil.com
  • 080-23395090

Our Products

Adofil offers a wide variety of fluid dispensing products including everything from automatic robotic dispensing systems to replacement barrels, needles, syringes, and tips. Compatible with most applications and industries, Adofil focuses on providing a high-quality, cost-effective, complete solution for your unique dispensing needs. Learn more about our turn-key systems and accessories below.

1.png

DSM-55 Series Digital Dispenser/Controller

ADOfil DS-M55 is basic controller for Syringe Liquid/paste dispensing.

Dispense any syringe-filled liquids/Semi liquids.

Successfully works with Sealants, Adhesives, Grease, Solder paste, Copper paste, Inks, Paints, Clay,3 axis robots.

Input pneumatic pressure 3~8 bar
Input power 220V~240V AC, 50 Hz
Power Rating 20 W Max
Dispensing time control Potentiometer setting
Vacuum Control Knob provided
Output Flow Control Pressure regulator Knob
Operating Modes Manual & Automatic dispensing
Controller Dimensions Length: 10" x Width: 5“ x Height: 3“
  • Easy interface-able with any Cartesian robots or other system
  • 3 Pin Aux cable for the interface
  • Foot pedal, Syringe-mounted Hand switch, Direct button for Manual actuation

DSD55_Digital_Paste_Dispenser.jpg

DSD55 Digital Paste Dispenser

ADOfil DS-D55 is Digital controller for Syringe Liquid / paste dispensing.

Dispense any syringe-filled liquids/Semi liquids.

Successfully works with Sealants, Adhesives, Grease, Solder paste, Copper paste, Inks, Paints, Clay, 3 axis robots

Input pneumatic pressure 6~8 bar
High precision of 0.1 sec to 9.9 sec.
Input power 220V~240V AC, 50 Hz
Power Rating 20 W Max
Dispensing time control Digital
Vacuum Control Knob provided
Output Flow Control Pressure regulator Knob
Operating Modes Manual and Automatic
Controller Dimensions Length: 10" X Width: 5 “ X Height: 3“

PD022.png

PD022 Peristaltic Pump Dispenser

Adofil's PD022 is Digital Dispenser for low viscous Liquid dispensing.

Peristaltic pump with high precision setup.

Successfully works with Instant adhesives,Acids,Ink,Water etc

Voltage AC220V, 50/60Hz
Speed 0~160 RPM
Vacuum Setting Digital
Time Setting Digital , 99.9 sec
Rolling/Back Rolling 1~999°
Min Dot 0.0001cc (?0.2 ~ ?0.7)
Liquid density Under 10000 cps
Operating Modes Manual and Automatic
Controller Dimensions Length: 19cm X Width: 18.5cm X Height: 12cm
  • Foot pedal, Syringe mounted Hand switch, Direct button for Manual actuation

dcdm30 - Copy.png

DCD M30 Direct Drum

Adofil's DCD-M30 Direct Container Adhesive sprayer is an unique design that allows your adhesive container to directly use with our dispenser without need of transferring adhesive from one container to other.

It helps to decrease the wastage of adhesive, avoid need to clean main container & reduce the refilling time.

Successfully works with Wood adhesives,Rubber Adhesives,Poly urethane Adhesives,Paints etc.

Operating pressure   3 to 8 bar
Pressure control Flow value
Safety valve included
Sizes 5, 10, 15, 25, 30 & 50 liters
Material available Mild steel, Stainless Steel
  • Adjustable spray Patten with accuracy
  • Especially Designed for Water based Adhesive , Synthetic adhesives
  • Adhesive original container can be directly used with system
  • Easy for maintenance & cleaning of parts

2234.png

FRD121 a+b Fixed Ratio Dispenser + Volume Control

Adofil's FRD121 a+b Fixed Ratio Dispenser is recommended for fixed ratio 2 component meter, mix and dispense applications, including hard to handle abrasive, heavy filled, thixotropic and/or odd ratio materials.

Nozzle Static Mixture, Disposable
Air Pressure 4 -6 Bar
Volume of Syringe a & b 50ml & 20ml
Start Signal Foot Pedal Switch, PLC input, Trigger Switch
Weight 12 Kg
Mediums Epoxy Mix, A+B Compound, Fixed Rate Viscous Liquids

glue ratio mixer1.jpg

ADOFIL AB Glue Variable Ratio Mixer VR2K

ADOfil VRD022 is a Dual glue mixer & dispenser with a variable ratio. In this system the mixing ratio of glue is adjusted by manually setting the Tank pressure and Mixing valve adjustment.

Suitable for max 50000 Centi and Poise viscosity adhesives like Epoxy resin & hardener, PU adhesive and primer mixing, etc.

Operating pressure 5 to 8 bar
Pressure control Air regulator
Safety valve included
Sizes 5, 10, 15, 25, 30 & 50 liters
Material available Mild steel, Stainless Steel

RD005.jpg

Adofil RD005 Advance 3-Axis Robot

Adofil's RD005 3-Axis glue dispenser is an unique design that allows you to dispense any liquid/semi liquid thru G-code program as per requirement. 

It helps to decrease the wastage of adhesive, avoid manual error, and increased productivity & increased quality. 

Successfully works with Wood adhesives, Rubber Adhesive, AB Glue, Poly urethane Adhesives, Grease, Sealants, Paints etc.

Bed Size 360 x 360 mm
X & Y movement 360mm
Z movement 120 mm
Job part size 360 W x 360 L x 220 H
Max.speed (mm/sec) 0.1~800/500
Dimensions (W x D x H mm) 585 x 610 x 610
Pay Load Y-axis/Axis 10kg/5kg
Resolution 0.01mm/Axis
Repeatability +/-0.01mm/Axis
Operation interface LCD panel & Computer Display
Drive mode Micro stepper motor/ Belt & LM Guide
Control method CNC G code
Axis control 3 Axis
Motor System Micro precession stepper motor
Net weight 41 kg
Operation environment Humidity:20-90%RH,Temperature:0-40°C
Data storage type CF Card, PC interface
Power Rating AC220V 50-60HZ 0.8KW
  • Tabletop automated dispense system to simplify the steps needed to upgrade your process.
  • Precision motion control results in repeatable production quality.
  • Robust construction provides movement stability at high speeds.
  • User-friendly software allows programs to be easily and quickly set up using the PC.
  • Increased productivity due to faster cycle times and less rejects.

20180625203331_4242811.png

Hot Melt Glue Dispensing Machine

Adofil’s hot melt glue machine controlled by programmable PLC and equipped with LCD screen offers user-friendly operation. 

  • Widely used in textile composite industry, woodworking industry, packaging industry, coating industry, industry, product assembly.
  • Capacity:200L(55GAL)
  • Motor:AC Variable Frequency Motor

GRD25_Autocan Extruder System.jpg

GRD25 Autocan Extruder System

ADOfil GRD25 is used to dispense one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Designed with innovative features plus advanced pump and air motor technologies,ADOfil GRD25 helps to maximize your plant’s production capacity.

  • Quick placement of drum or pail
  • Integrated air controls offer easy-to-see, easy-to-use controls
  • Intuitive user interface
  • Platen wipers can be replaced in seconds
  • Pump’s quick-disconnect coupler,turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
  • Optional sensors and light tower let operator know when it’s time to change the drum
  • Optional allow complete control over the tandem system Foot switch & Panel button for On & Off triggering
  • Rigid structure

PTV112 LF Pinch Tube Valve1111.png

PTV112 LF Pinch Tube Valve

Engineered for precise control of medium to high viscosity liquids. The easy-to-use stroke control adjustment knob ensures accurate and repeatable dispensing.

Operating Air Pressure 60-75psi
Material Delivery Pressure 100psi max
Operating Air 1/8" Hose Barb
Mounting Hole Detail 1/4"-28 UNC
Weight 1.72kg

AMS15 Mini Spool Valve1121.png

AMS15 Mini Spool Valve

Adofil's AMS15 Mini Spool Valve is a mini-spool valve designed for dispensing small volumes of a medium to high viscosity materials. When air pressure is applied to the air inlet of the valve, the spool will be forced forward and fluid is dispensed.

Operating Air Pressure 70-100psi
Material Inlet 1/8" NPT
Material Outlet Luer Lock
Valve Body Aluminum
Weight 255g

CVA0012 Catridge valve.png

CVA 0012 Cartridge Valve

This cartridge valve is pneumatically-operated valve designed to control glue dropping of glue syringe or cartridges.

This ADOfil CVA0012 Cartridge valve is Suck back type,Flow Adjustable,Corrosion proof material,Interface-able with Robots , PLC control systems needs ADOfil valve Controller DCD60 to actuate and interface,Precision actuation.

Operative Pneumatic Pressure 6 ~ 8 bar

VP 0113 Poppet Valve1222.png

VP 0113 Poppet Valve

Adofil's VP 0113 Poppet Valve is a multi-purpose, poppet-style, pneumatic  valve designed for dispensing medium to high viscosity liquids such as silicone, epoxy, solder paste, and other filled materials.

Operating Air Pressure 70-100psi
Material Delivery Pressure 85psi max
Air Inlet M5 x 0.8
Valve Body Aluminum
Weight 180g

AS02S.jpg

AS02S-SuckBack Valve

Successfully works with Wood adhesives,Rubber Adhesive,Poly urethane Adhesives,Grease,Sealants,Paints etc.

VD 0510 Diaphragm Valve11.png

VD 0510 Diaphragm Valve

The VD510 is a diaphragm valve designed for precise flow control of low to medium viscosity materials

The diaphragm separates the wetted parts from the moving parts, thus making the valve ideal for dispensing cyanoacrylates, anaerobic, reagents,

  • Stroke adjustment to fine tune shots.
  • Separated wetted parts.
  • Easily serviceable.

Gluing Cylinder Nozzles11.png

Gluing Cylinder Nozzles

These nozzles are a straightforward solution for simple wide glue spreading on flat surfaces between 72 and 180mm.

This attachment dispenses glue in straight lines which follow the grooves on the cylinder. The cylinder is fixed and does not roll as the attachment moves across the wood, which works well for planed pieces with flat surfaces. 

Rubber Roller Nozzles11.png

Rubber Roller Nozzles

Rubber roller nozzles are an ideal all-purpose tool for any glue work calling for thin, even coating of glue on a large surface area. Made of durable rubber, these roller nozzles are made for heavy daily use and will apply the same even layer of glue whether it's the first or 50th application of the day.

DCD MXX_Pressure_Tanks.jpg

DCD MXX Pressure tanks

Adofil DCD-MXX Direct Container Dispensing pressure tanks are equipped unique design that allows your adhesive container to directly use with our dispenser without need of transferring adhesive from one container to other.

It helps to decrease the wastage of adhesive, avoid need to clean main container & reduce the refilling time.

Successfully works with Wood adhesives,Epoxy resin and hardners,Rubber Adhesives,Poly urethane Adhesives,Paints etc

Operating pressure 3 to 8 bar
Pressure control Flow value
Safety valve included
Sizes 5,10,15,25,30 & 50 liters
Material available Mild Steel, Stainless Steel

214.jpg

Manual Barrel Loaders

The manual barrel loaders will fill a barrel directly from a 6oz, 12oz, 20oz, or 300ml cartridge. Barrel loaders are an efficient method of transferring greases, epoxies, silicones, solder pastes, and other thixotropic materials into a disposable barrel. The barrel loaders can be used for timed filling when connected to a Adofil automatic controller.

DRT400.png

DRT 400 Rotary Glue Dispenser

ADOfil's make DRT400 is the Digital Glue dispenser used to dispense any cartridge filled liquids/Semi liquids With Rotary bed.

Successfully works with Sealants,Adhesives,Solder paste,Copper paste and any Cartridge liquid or semi liquids.

Input pneumatic pressure 3~8 bar
High precision of 0.1 sec to 9.9 sec
Input power 220V~240V AC, 50 Hz
Power Rating 20 W Max
Dispensing time control Digital
Rotation Digital control
Vacuum  Control Knob provided
Output Flow Control Pressure regulator Knob
Operating Modes Manual dispensing & Automatic dispensing
Controller Dimensions Length: 400mm; Width: 400mm; Height: 600mm
Accessories included Foot Switch, Airline input quick fitting Universal Power Cord,Aux cable
  • LED 7 Segment Display enables easy, precision setting of dispense time and rotation angle
  • 3 Pin Aux cable for the interface
  • Foot pedal, Direct button for Manual actuation

F9000N-Series-Assembly-Line-Robots111.jpg

Series Gantry Industrial Robots

Gantry-cartesian robotic systems can be easily integrated with in-line industrial automation. Gantry industrial robots have all their axes above the work area making them ideal for large dispensing applications and jobs requiring a fourth axis, such as when using a spray valve. These robots can be manufactured to accommodate custom sizes up to 8m x 6m.

FRD022_Fixed_Ratio_Glue_Mixer_Dispenser.jpg

FRD022 Fixed ratio glue mixer dispenser

ADOfil FRD022 is a Dual glue mixer & dispenser with a fixed ratio. This unit is empowered by pneumatic cylinder pumps, in which the mixing ratio of glue is decided, so any fixed ration can be achievable.

Suitable for all viscosity adhesives like Epoxy resin & hardener, PU adhesive and primer mixing, etc.

Operating pressure 3 to 8 bar
Pressure control Flow value
Safety valve included
Sizes 5, 10, 15, 25, 30 & 50 liters
Material available Mild steel, Stainless Steel

VR2KH_Pneumatic_Variable_Ratio_Glue_Mixer_Dispenser_With_Preheater.jpg

VR2KH Pneumatic Variable Ratio Glue Mixer Dispenser With Preheater

ADOfil VR2KH is a Dual glue mixer & dispenser with a variable ratio. In this system the mixing ratio of glue is adjusted by manually setting the Tank pressure and Mixing valve adjustment.

Preheater tanks are provided as per Customer requirement.

Suitable for max 50000 Centi, Poise viscosity adhesives like Epoxy resin & hardener, PU adhesive and primer mixing, etc

Operating pressure 5 to 8 bar
Preheating 30 ° C to 100° C
Pressure control Air regulator
Safety valve included
Sizes 5, 10, 15, 25, 30 & 50 liters
Material available Mild steel, Stainless Steel
  • Mix ration 1:1, 1:2,1:3, 1:4, 1:5
  • Pressure tanks up to 50 liters
  • Pre-heater tanks, applicator gun
  • Static mixers to ensure proper mixing
  • Adjustable output volume, by setting tank pressure & 2K Valve knob
  • Foot switch & Panel button for On & Off triggering
  • Rigid structure

adoo.PNG

Cartridge Sealant Dispenser

Cartridge Sealant Dispenser suitable for Precision dispensing directly from 280ml cartridges. No need to fill Adhesives into container. Dispensing can be done with a foot actuator. Cartridge is made of metal housing.

Medium Cartridge Adhesives
Voltage 100-240 VAC 50/60Hz
Air Input 70 - 100psi
Air Output 1 - 100psi
Dimensions 10.4" x 8.25" x 2.75"
  • Nozzle can be customized to the requirement.
  • Save the time and expense on disposable adhesives accessories like Barrels, Syrings, Tips etc.
  • Foot actuated or Auto mode

ABS2V_AB_Mixer_Valve.jpg

ABS2V AB Glue Mixer Valve (2K)

Successfully worked with Epoxy resin and Hardener, PU Adhesive and Activator

Both ADOfil make pneumatic valves are Suck back type,Flow Adjustable,Corrosion proof material,Interface-able with Robots, PLC control systems and Needs ADOfil valve Controller DCD60 to actuate and interface, Precision actuation.

Operative Pneumatic Pressure 6~8 bar

SG1600_Manual_Adhesive_Gun 1.jpg

SG1600 Manual Adhesive Gun

CG12_Manual_Caulking_Gun_300_ML.jpg

CG12 Manual Caulking Gun

300 ML

CG15_Manual_Caulking_Gun_600_ML.jpg

CG15 Manual Caulking Gun

600 ML

PCG12_PNEUMATIC CAULKING GUN _300 ML.jpg

PCG12 Pneumatic Caulking Gun

300 ML

PCG15_PNEUMATIC_CAULKING_GUN_600 mL.jpg

PCG15 Pneumatic Caulking Gun

600 ML

DSG50_DUAL_SYRINGE_GUN_50_ML.jpg

DSG50 Dual Syringe Gun ML

1:1, 2:1, 10:1, 4:1

Clear_Syringe_Barrel_Wiith_Piston.jpg

Clear Syringe Barrel with Piston

5cc, 10cc, 30cc & 50cc

DUAL_HELIX_BARREL_WITH_PISTON.jpg

Dual helix barrel with piston

300 cc

Pneumatic_Sealant_Catridges_300CC_and_600CC.png

Pneumatic Sealant cartridges

300CC & 600cc

Green_Syringe_Barrel_Adaptor.jpg

Green Syringe Barrel Adaptor

5CC, 10CC, 30CC & 50CC

SS_Syringe_Tips.jpg

SS Syringe tips 1”

14G, 15G, 18G,20G, 21G,23G, 25G, 27G

SS_Syringe_Tips 45°.jpg

SS Syringe tips 45° 1/2”

14G, 16G, 18G, 20G, 22G, 25G,27G

Taper_Syringe _Tips.jpg

Taper Syringe tips 1/2”

14G, 16G, 18G, 20G, 22G, 25G,27G

STATIC_MIXERS_B2,B7,F5.jpg

Static Mixers

B2, B7, F5